IAP Hydraulic Pump's Mechanical Configuration:
IAP10-2 Series Pumps Parameters:
Dimensions of Shaft End
|
TYPE |
NO. OF TEETH |
DIAMETRAL PITCH |
PRESSURE ANGLE |
MAJOR DIAMETER |
BASE DIMAMETER |
MIN MEASUREMENT OVER TWO PINS |
PIN DIAMETER |
INVOLUTE SPLINE RULE |
|
IAP10-2 |
13 |
1/2 |
30∘ |
Ø21.8-0.130 | Ø18.16-0.110 |
24.94 |
3.048 |
ANSI B92.1-1970 |
Main Parameters
|
TYPE |
DISPLACEMENT (mL/r) |
RATED PRESSURE (MPa) |
PEAK PRESSURE (MPa) |
RATED SPEED (r/min) |
PEAK SPEED(r/min) |
DIRECTION OF ROTATION |
APPLICABLE VEHICLE MASS(ton) |
|
IAP10-2 |
2x10 |
20 |
23 |
2300 |
2500 |
Counter clockwise (viewed from shaft end) L |
2 |
We have a full rage of IAP Series pumps for your choices, including including IAP10, IAP12, IAP63, IAP112. More information can be seen in Hydraulic Pump and Motor data sheets from Download page.