Electric Winch - IDJ Series are widely applied in ship and deck machinery, construction machinery, dredging solution, marine machinery and oil exploration. Specifically, this electric winch was designed and manufactured for cutter head dredgers, in Uzbekistan Belt and Road Initiative project. For the same project, we also designed and produced highly efficient cutter heads. With the continuous development of production and measurement, our skillset of producing dredging winches and cutter heads becomes perfectly mature. This type and its similar kinds of winch have been exported to many countries around the world.
Mechanical Configuration: The dredging winch consists of electric motor with brake, planetary gearbox, drum and Frame. Customized modifications for your best interests are available at any moment.
The Dredging Winch's Main Parameters:
| The 1st Pull (KN) |
80 |
| The Speed of the 1st Layer Cable Wire(m/min) |
6/12/18 |
| The Maximum Static Load of the 1st Layer (KN) |
120 |
| Diameter of Cable Wire (mm) |
24 |
| Working Layers |
3 |
| Cable Capacity of Drum (m) |
150 |
| Electric Motor Model |
YVF2-250M-8-H |
| Power (KW) |
30 |
| Revolution Speed of Electric Motor(r/min) |
246.7/493.3/740 |
| Electric System |
380V 50Hz |
| Levels of Protection |
IP56 |
| Insulation Levels |
F |
| Planetary Gearbox Model |
IGT36W3 |
| Ratio of Planetary Gearbox |
60.45 |
| Static Braking Torque (N.m) |
45000 |